On Thu, 2007-01-04 at 17:14 -0800, jaeho lee wrote: > Hey all. My name is Jae, just registered mailing list in several days > ago. > > Currently I'm working on hx2490b model where I will set GPE and Bluez > up. According to alfi's blog http://pn.org/wordpress/?cat=2 I > succeeded to port GPE. But I found that my screen is shifted to right > about 1/2 inch so I can't get to very right edge on the screen. If I > rotate screen to left. My screen goes off 1/2 inch to down. Actually > it happens after the tux’s eyes go bloodshot and during I see Linux > booting. So I think somethings wrong at the moment to put ramdisk(from > SD card) on the memory. Is there anybody who has same problem with me? > Any suggestions?
To quote what I've said previously about this "It sounds like that model has a different LCD and requires different LCD timings. You either need to experiment with pxafb's parameters or dump the timings under windows CE." > I saw someone was going to try set bluetooth stuff on PDA, but I can't > see any result. Anybody done with bluez sutff? And also, I can't find > Linux kernel source which somebody made zImage from. Where can I get > actual kernel source before making zImgage. It seems like from Zaurus > with some patches. I will really appreciate that if let me know where > are original initrd, zImage and rootfs.img so that I can modify them > to fit my system The original images and kernels were built with OpenEmbedded (OE, www.openembedded.org). Regards, Richard _______________________________________________ Hx2000-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/hx2000-port
