Hi, Further to messages from Moritz Karbach and others,
With regard to the ACX100 on the hx4700, mine still doesn't work. It was okay (-ish) on 2.6.15-hh1, but not working on -hh2, in spite of others assuring me that it does work (usually!). I'm using the firmware files from the SDG 20060615-gpe dir. This is what I see on bootup, in the dmesg log: --- acx: this driver is still EXPERIMENTAL acx: reading README file and/or Craig's HOWTO is recommended ... ... running on little-endian CPU PCI module v0.3.35 initialized, waiting for cards to probe... acx: found ACX100-based wireless network card initial debug setting is 0x000A using IRQ 46 acx: eCPU didn't indicate radio typereset_dev() FAILED acx-mem: probe of acx-mem.0 failed with error -5 --- > in connection with this, I'd ask a question. which is the right order in > loading/unloading acx and hx4700-acx modules? hx4700-acx seems to be loaded first, followed by acx. > I'm asking this because it happened several times that modprobe freezed > (can't remember if while loading or unloading, or which of the too), > eating 100% of CPU and could not be killed, although the system was > still responsive (I could always reboot it the clean way). Confirmed on my hx4700: the hx4700-acx module uses 100% CPU when one attempts to unload it. Cheers, Lex. _______________________________________________ Hx4700-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/hx4700-port
