On Mon, Jul 26, 2010 at 10:29 AM, durango <[email protected]> wrote: > Some minor success with the Asus n61 on kernel 2.6.35-rc6 > > # cat /sys/kernel/debug/vgaswitcheroo/switch > > 0:+:Pwr:0000:00:02.0 > 1: :Pwr:0000:01:00.0 > > See nvidia card now powered up on vgaswitcheroo ( thanks Dave ) ,still > we need to be able to pass some > correct args to acpi call or i2c for card1 & the DSM acpi functions > ,this has worked but the LCDD screen > loses it lines or doesnt lock in on log out or X restart,it doesnt hard > lock the machine unless you > try to switch the GFX0 on agian or try another acpi call ,even after > then doing a Fn F7 which switches > it off . > > Passing DDIS & DGID to switcheroo reports in syslog to logout etc ,but > the machine hard locks when logging > out at present ,still trying different methods out . > See below ; > When pushing glx functions the card and system temp rises 8-10 Deg C. > The system fan also responds now after fixing the dsdt ,this should > achieve 5000 frames over 5 seconds with > MESA DRI GL modules ,not sure if the nvidia adapter is pushing it > functions through the Intel Head ,still to be > determined . > Not sure why the nvidiafb is required ,but it performs a function ,and > the card wont switch without both framebuffers. > > To get this i carried these steps out ; > > 1 - modified and cleaned my DSDT file > 2 - Kernel Boot Parameters are ; i915.modeset=1 i915.powersave=0 > apic=debug acpi_debug_level=0xFFFFFFFF > acpi_osi="!Linux" > > Before Starting X > > 3 - chmod 666 /dev/dri/card* > 4 - Specify the Intel driver in Xorg for the Nvidia card & set the > nvidia card to a blind screen ,i have screen 1 and the intel on 0 > 5 - modprobe nvidiafb > 6 - modprobe intelfb > 7 - Startx > 7 - modprobe nouveau ,rmmod nouveau ,modprobe nouveau > 8 - You should now see 2 cards in /dev/dri/ & /sys/bus/acpi/devices/ > 9 - You should also see this in the i2cdetect -l > > i2c-0 i2c nouveau-0000:01:00.0-0 I2C adapter > i2c-1 i2c intel drm CRTDDC_A I2C adapter > i2c-2 i2c intel drm LVDSDDC_C I2C adapter > i2c-3 i2c intel drm HDMIC I2C > adapter > i2c-4 i2c DPDDC-C I2C > adapter > > See these links also for bios /firmware checking ,acpi & dsdt fixing . > > http://www.lavalys.com/support/downloads for obtaining win dsdt file > for comparison > http://linux.aldeby.org/bios-dst.html > >> Results from Syslog >> >> [drm] nouveau 0000:01:00.0: Detected an NV50 generation card > (0x0a5a80a2) >> vga_switcheroo: enabled >> [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN >> [drm] nouveau 0000:01:00.0: ... BIOS signature not found >> [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM >> [drm] nouveau 0000:01:00.0: ... BIOS signature not found >> [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PCIROM >> nouveau 0000:01:00.0: Invalid ROM contents >> [drm] nouveau 0000:01:00.0: ... BIOS signature not found >> [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from ACPI >> i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 >> [drm] nouveau 0000:01:00.0: ... appears to be valid >> [drm] nouveau 0000:01:00.0: BIT BIOS found >> [drm] nouveau 0000:01:00.0: Bios version 70.16.58.00 >> [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid >> [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently > supported >> [drm] nouveau 0000:01:00.0: Found Display Configuration Block version > 4.0 >> [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02011300 00000000 >> [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 0000000e 00000000 >> [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 >> [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff >> [drm] nouveau 0000:01:00.0: Adaptor not initialised >> [drm] nouveau 0000:01:00.0: Running VBIOS init tables >> [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset > 0x6E19 >> [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset > 0x72B1 >> [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset > 0x81B1 >> [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset > 0x81D3 >> [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset > 0x8335 >> [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x839A >> i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-2: NAK from device addr 0x50 msg #0 >> i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 >> [drm] nouveau 0000:01:00.0: Couldn't find matching output script table >> [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM >> i2c i2c-2: NAK from device addr 0x50 msg #0 >> i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 >> i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-2: NAK from device addr 0x50 msg #0 >> i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-2: NAK from device addr 0x50 msg #0 >> [TTM] Zone kernel: Available graphics memory: 1923028 kiB. >> [TTM] Initializing pool allocator. >> [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) >> [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 >> [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 >> [drm] nouveau 0000:01:00.0: Detected a DAC output >> [drm] nouveau 0000:01:00.0: Detected a VGA connector >> PM: Adding info for No Bus:card1-VGA-2 >> PM: Adding info for i2c:i2c-4 >> i2c i2c-4: adapter [nouveau-0000:01:00.0-0] registered >> PM: Adding info for No Bus:i2c-4 >> i2c-dev: adapter [nouveau-0000:01:00.0-0] registered as minor 4 >> i2c i2c-4: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-4: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-4: NAK from device addr 0x50 msg #0 >> i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 >> No connectors reported connected with modes >> [drm] Cannot find any crtc or sizes - going 1024x768 >> [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x40250000, bo >> ffff880129b94000 >> PM: Adding info for No Bus:fb1 >> fb1: nouveaufb frame buffer device >> [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 1 >> i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-2: NAK from device addr 0x50 msg #0 >> i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-2: NAK from device addr 0x50 msg #0 >> i2c i2c-4: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-4: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-4: NAK from device addr 0x50 msg #0 >> i2c i2c-4: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-4: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-4: NAK from device addr 0x50 msg #0 >> i2c i2c-4: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-4: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-4: NAK from device addr 0x50 msg #0 >> i2c i2c-4: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-4: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-4: NAK from device addr 0x50 msg #0 >> i2c i2c-4: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-4: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-4: NAK from device addr 0x50 msg #0 >> i2c i2c-4: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-4: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-4: NAK from device addr 0x50 msg #0 >> i2c i2c-4: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-4: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-4: NAK from device addr 0x50 msg #0 >> i2c i2c-4: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-4: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-4: NAK from device addr 0x50 msg #0 >> PM: Adding info for No Bus:0:19 >> i2c i2c-4: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-4: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-4: NAK from device addr 0x50 msg #0 >> i2c i2c-4: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-4: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-4: NAK from device addr 0x50 msg #0 >> i2c i2c-4: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-4: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-4: NAK from device addr 0x50 msg #0 >> i2c i2c-4: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-4: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-4: NAK from device addr 0x50 msg #0 >> i2c i2c-4: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-4: master_xfer[1] R, addr=0x50, len=1 >> i2c i2c-4: NAK from device addr 0x50 msg #0 >> i2c i2c-4: master_xfer[0] W, addr=0x50, len=1 >> i2c i2c-4: master_xfer[1] R, addr=0x50, len=1 > > Cheers > -- > This message was sent from Launchpad by the user > durango (https://launchpad.net/~durango8113) > using the "Contact this team" link on the Hybrid Graphics Linux > team page to each member directly. > For more information see > https://help.launchpad.net/YourAccount/ContactingPeople >
_______________________________________________ Mailing list: https://launchpad.net/~hybrid-graphics-linux Post to : [email protected] Unsubscribe : https://launchpad.net/~hybrid-graphics-linux More help : https://help.launchpad.net/ListHelp
