Huh, that was not what I expected. Could you re-run the commands, but then
add sudo cat /proc/acpi/call after each sudo tee /proc/acpi/call command?
Please
attach dmesg as well and cat /proc/cmdline
Try using one space as separator as well. When I tried multiple spaces
between
_DSM and the arguments, I got an "Method call failed: Error: AE_SUPPORT"
error.
Thanks,
Lekensteyn
2012/1/7 Wepmaschda <wepmasc...@gmx.net>
> Since it seems that the test wasn't successful, I attached the whole
> terminal output.
>
> I installed the bumblebee-git and apci_call-git AUR packages, added me
> to group bumblebee, restarted the system and tried the commands you
> told me.
>
> Is my system more complicated? ;-)
>
> 2012/1/5 Lekensteyn <lekenst...@gmail.com>:
> > I found the calls in the acpidump and could see on beforehand that it
> does
> > not work for
> > you since these kind of calls require additional treatment, namely saving
> > and restoring
> > the PCI configuration space.
> >
> > Please confirm (with PM disabled, but keep cardo{n,ff} scripts) that the
> > following sequence
> > does work (after making sure that you no acpi calls have been performed
> this
> > session, i.e.
> > by rebooting)
> >
> > # should not show FF FF FF ...
> > xxd -c4 /proc/bus/pci/01/00.0
> >
> > cat /proc/bus/pci/01/00.0 > saved.txt
> > sudo tee /proc/acpi/call < /etc/bumblebee/cardoff
> >
> > # should show FF FF FF ...
> > xxd -c4 /proc/bus/pci/01/00.0
> > sudo tee /proc/acpi/call < /etc/bumblebee/cardon
> >
> > # should not show FF FF FF ...
> > xxd -c4 /proc/bus/pci/01/00.0
> > sudo tee /proc/bus/pci/01/00.0 < saved.txt
> > optirun glxgears
> >
> >
> > Please attach the output of the above commands.
> >
> > Regards,
> > Lekensteyn
> >
> >
> > On Thu, Jan 5, 2012 at 11:16 PM, Wepmaschda <wepmasc...@gmx.net> wrote:
> >>
> >> 2012/1/4 Lekensteyn <lekenst...@gmail.com>:
> >> > Those ON and OFF lines are code that can be inserted in
> >> > /etc/bumblebee/cardon
> >> > and /etc/bumblebee/cardoff which needs Bumblebee. See
> >> > https://github.com/Bumblebee-Project/Bumblebee/wiki/ACPI-Removed for
> how
> >> > to
> >> > use those calls. Note that the card has to be on before suspending or
> >> > the
> >> > card
> >> > won't be useable until the PCI configuration space is reinitialized.
> >> > Sorry
> >> > for the
> >> > technical details, I just try to be complete.
> >>
> >> I'm not sure if I already understand it completely. ;-)
> >> Did you find those calls out from the acpidump? Should they already
> >> solve the problem?
> >>
> >> I created the files cardon and cardoff with the one-lines but "sudo
> >> make load" still doesn't work with the same error.
> >>
> >> Also I started Windows7 and used the nvidia card before I booted back
> >> into archlinux before I tested this. So the card should have been
> >> "on".
> >>
> >> Should it already work or can I help with some more information/testing?
> >>
> >>
> >> > I'll see if there is an automated way to detect this kind of methods
> and
> >> > integrate
> >> > it in bbswitch.
> >>
> >> If I can help with my hardware, just tell me.
> >
> >
>
_______________________________________________
Mailing list: https://launchpad.net/~hybrid-graphics-linux
Post to : hybrid-graphics-linux@lists.launchpad.net
Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
More help : https://help.launchpad.net/ListHelp
