Sanjit, switching to a full config file seems to have solved the issue. If this is the case, let's say I have two servers, fairfield and clifton. Hypertable runs on clifton and my client side is on fairfileld. Does this mean I'll have to have at least Hyperspace running on fairfield as well? Or, maybe I should be able to modify the conf file and all should work fine?
Thanks, Alex On Fri, Jul 30, 2010 at 10:13 AM, Sanjit Jhala <[email protected]> wrote: > Hi Alex, > > Whats the error message you see in the logs (particularly the Hyperspace > log) ? > Also can you try adding the following to your config file: > > Hyperspace.Replica.Host=localhost > Hyperspace.Replica.Port=38040 > Hyperspace.Replica.Dir=hyperspace > Hyperspace.Replica.Workers=20 > > -Sanjit > > On Thu, Jul 29, 2010 at 5:10 PM, Alex Dong <[email protected]> wrote: >> >> I tried to use the cfg file in /opt/hypertable/current/conf, which >> is working fine with the thrift client, etc. But still no luck. >> >> Alex >> >> On Jul 30, 8:07 am, Alex Dong <[email protected]> wrote: >> > Hi Stanislav, >> > >> > I just tried the binding. The first thing I ran into is that >> > the .cfg file contains an old Hyperspace.Master.Host entry. >> > after I changed to Replica, I started to get "segmentation fault". >> > >> > I haven't really digged into hyperspace code to figure out >> > why. Just wondering maybe you've seen this before. >> > >> > Here is the hypertable.cfg file I'm using: >> > >> > $ cat hyperspace.cfg >> > # Hyperspace >> > Hyperspace.Replica.Host=localhost >> > Hyperspace.Replica.Port=38040 >> > >> > # Hypertable.Master >> > Hypertable.Master.Host=localhost >> > Hypertable.Master.Port=38050 >> > >> > Anything obviously wrong with this? >> > >> > Alex >> > >> > On Jul 28, 1:10 am, Stanislav Yudin <[email protected]> wrote: >> > >> > > Yes, we are using this code as the base for our python module to >> > > access >> > > hypertable. Its quite stable for us and last time we were using it on >> > > 0.9.3.2 so it should work on 0.9.3.4 too. >> > >> > > On Tue, Jul 27, 2010 at 9:07 PM, Alex Dong <[email protected]> >> > > wrote: >> > > > I notice that there have been quite a few discussion over the >> > > > python- >> > > > hypertable binding. Especially in this follow-up [1] and the >> > > > original >> > > > announcement [2]. I'm wondering is this binding up-to-date? Anyone >> > > > has used it on 0.9.3.4? >> > >> > > > Thanks, >> > > > Alex >> > >> > > > [1]: >> > >> > > >> > > > >http://groups.google.com/group/hypertable-dev/browse_thread/thread/c5... >> > > > [2]: >> > >> > > >> > > > >http://groups.google.com/group/hypertable-dev/browse_thread/thread/52... >> > >> > > > -- >> > > > You received this message because you are subscribed to the Google >> > > > Groups >> > > > "Hypertable Development" group. >> > > > To post to this group, send email to >> > > > [email protected]. >> > > > To unsubscribe from this group, send email to >> > > > >> > > > [email protected]<hypertable-dev%[email protected]> >> > > > . >> > > > For more options, visit this group at >> > > >http://groups.google.com/group/hypertable-dev?hl=en. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Hypertable Development" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]. >> For more options, visit this group at >> http://groups.google.com/group/hypertable-dev?hl=en. >> > > -- > You received this message because you are subscribed to the Google Groups > "Hypertable Development" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/hypertable-dev?hl=en. > -- You received this message because you are subscribed to the Google Groups "Hypertable Development" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/hypertable-dev?hl=en.
