> -----Original Message----- > From: Jean Delvare [mailto:[EMAIL PROTECTED] > Sent: Thursday, January 10, 2008 9:55 PM > To: Mike Rapoport > Cc: [email protected]; ARM Linux; Russell King - ARM Linux; Eric Miao > Subject: Re: [i2c] [PATCH 2/2] [resend] Add polling transfer for i2c-pxa > > On Thu, 10 Jan 2008 14:16:06 +0200, Mike Rapoport wrote: > > Jean Delvare wrote: > > > Hi Mike, > > > > > > On Thu, 20 Dec 2007 16:08:33 +0200, Mike Rapoport wrote: > > >> The below patch adds polling I2C transfer implementation for PXA I2C. > > > > > > This patch doesn't apply on top of my current stack, most probably due > > > to a conflict with this patch by Eric Miao: > > > > > > > http://khali.linux-fr.org/devel/linux-2.6/jdelvare-i2c/i2c-pxa-use-cpu_is_ > pxa27x.patch > > > > > > Can you please update your patch so that it applies cleanly on top of > > > 2.6.24-rc7 + the patch above? > > > > Hope this one will go... > > Yes, this one applied just fine, thank you. I've added it to my tree. > However I don't have the hardware to test it, I can't even built the > i2c-pxa driver. Can someone else please review and/or test the patch > and add his/her Acked-by? >
Acked-by: eric miao <[EMAIL PROTECTED]> I've tested this patch on zylonite/pxa3xx platform with both 'use_pio = 0' and 'use_pio = 1', and is known to work. > Thanks, > -- > Jean Delvare _______________________________________________ i2c mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/i2c
