From: Bryan Wu <[EMAIL PROTECTED]>
Blackfin TWI controller hardware pin should be requested from GPIO port
controller
Before BF54x, there is no need to do this. But as long as BF54x and BF52x
are supported by this generic driver, the missing pin mux operation should be
added.
Signed-off-by: Bryan Wu <[EMAIL PROTECTED]>
Signed-off-by: Bryan Wu <[EMAIL PROTECTED]>
---
drivers/i2c/busses/i2c-bfin-twi.c | 29 +++++++++++++++++++++++++++++
1 files changed, 29 insertions(+), 0 deletions(-)
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c
b/drivers/i2c/busses/i2c-bfin-twi.c
index 515fe08..674c053 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -34,6 +34,7 @@
#include <linux/platform_device.h>
#include <asm/blackfin.h>
+#include <asm/portmux.h>
#include <asm/irq.h>
#define POLL_TIMEOUT (2 * HZ)
@@ -63,6 +64,7 @@ struct bfin_twi_iface {
int msg_num;
int cur_msg;
void __iomem *regs_base;
+ int bus_num;
};
@@ -89,6 +91,23 @@ DEFINE_TWI_REG(XMT_DATA16, 0x84)
DEFINE_TWI_REG(RCV_DATA8, 0x88)
DEFINE_TWI_REG(RCV_DATA16, 0x8C)
+static u16 pin_req[2][3] = {
+ {P_TWI0_SCL, P_TWI0_SDA, 0},
+ {P_TWI1_SCL, P_TWI1_SDA, 0},
+};
+
+static int setup_pin_mux(struct bfin_twi_iface *iface, int action)
+{
+ int rc = 0;
+
+ if (action)
+ rc = peripheral_request_list(pin_req[iface->bus_num],
"i2c-bfin-twi");
+ else
+ peripheral_free_list(pin_req[iface->bus_num]);
+
+ return rc;
+}
+
static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
{
unsigned short twi_int_status = read_INT_STAT(iface);
@@ -640,6 +659,7 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
goto out_error_no_irq;
}
+ iface->bus_num = pdev->id;
init_timer(&(iface->timeout_timer));
iface->timeout_timer.function = bfin_twi_timeout;
iface->timeout_timer.data = (unsigned long)iface;
@@ -653,6 +673,12 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
p_adap->class = I2C_CLASS_ALL;
p_adap->dev.parent = &pdev->dev;
+ rc = setup_pin_mux(iface, 1);
+ if (rc) {
+ dev_err(&pdev->dev, "Can't setup Pin Mux!\n");
+ goto out_error_pin_mux;
+ }
+
rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
IRQF_DISABLED, pdev->name, iface);
if (rc) {
@@ -690,6 +716,8 @@ out_error_add_adapter:
free_irq(iface->irq, iface);
out_error_req_irq:
out_error_no_irq:
+ setup_pin_mux(iface, 0);
+out_error_pin_mux:
iounmap(iface->regs_base);
out_error_ioremap:
out_error_get_res:
@@ -706,6 +734,7 @@ static int i2c_bfin_twi_remove(struct platform_device *pdev)
i2c_del_adapter(&(iface->adap));
free_irq(iface->irq, iface);
+ setup_pin_mux(iface, 0);
return 0;
}
--
1.5.4.3
_______________________________________________
i2c mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/i2c
