simply use "depends on BLACKFIN" (which is technically correct) and just
document
which machines have the device
Signed-off-by: Bryan Wu <[EMAIL PROTECTED]>
---
drivers/i2c/busses/Kconfig | 9 ++++++---
1 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 5fa9c3c..8891e22 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -100,10 +100,13 @@ config I2C_AU1550
config I2C_BLACKFIN_TWI
tristate "Blackfin TWI I2C support"
- depends on BF534 || BF536 || BF537
+ depends on BLACKFIN
help
- This is the TWI I2C device driver for Blackfin 534/536/537/54x.
- This driver can also be built as a module. If so, the module
+ This is the TWI I2C device driver for Blackfin BF522, BF525,
+ BF527, BF534, BF536, BF537 and BF54x. For other Blackfin processors,
+ please don't use this driver.
+
+ This driver can also be built as a module. If so, the module
will be called i2c-bfin-twi.
config I2C_BLACKFIN_TWI_CLK_KHZ
--
1.5.4.3
_______________________________________________
i2c mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/i2c
