On Tue, 3 Jun 2008, Jon Smirl wrote: > On 6/3/08, Trent Piepho <[EMAIL PROTECTED]> wrote: > > On Tue, 3 Jun 2008, Jon Smirl wrote: > > > > > drivers/i2c/busses/i2c-elektor.c | 2 +- > > > > > drivers/i2c/busses/i2c-gpio.c | 2 +- > > > > > drivers/i2c/busses/i2c-i801.c | 2 +- > > > > > drivers/i2c/busses/i2c-ibm_iic.c | 4 ++-- > > > > > drivers/i2c/busses/i2c-iop3xx.c | 2 +- > > > > > drivers/i2c/busses/i2c-isch.c | 2 +- > > > > > drivers/i2c/busses/i2c-mpc.c | 2 +- > > > > > > Freescale embedded, no sticks > > > > > > I know you're wrong about this one, because I have a Freescale board with > > an mpc i2c adapter with SPD SODIMMs on the I2C bus sitting right in front > > of me. The whole reason I added hexdump support the I2C tools' SPD parser > > was so I could parse the SPD data by hexdumping the eeproms with busybox. > > Which CPU are you using? Maybe we should change to a socket.
MPC8572E, but U-Boot has support for programming the DRAM controller from SPD data for a lot of Freescale chips. _______________________________________________ i2c mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/i2c
