On Monday 09 June 2008, Jean Delvare wrote: > On Mon, 9 Jun 2008 16:47:42 +0200, Uli Luckas wrote: > > I am in the process of trying out a display connected to a colibri > > board's pxa frame buffer device. The display's power supply is switch > > through i2c. > > > > In order to use the frame buffer console I have i2c and pxafb compiled > > in. > > > > By default, the pxafb driver get's initialized before the i2c bus causing > > the display power up to fail. > > > > What do i2c people think about changing the link order here? > > Why don't you ask on the i2c mailing list? Cc added. > I wanted to get i2c developers plus frame buffer and other i2c client developers involved. Crossposting to more then 2 lists seemed wrong.
> Personally I have no objection, but dependencies can be tricky so > you'll have to be careful. video is early in the link order at the > moment. > Yep. I might come back for help on that later. > > What do other frame buffer drivers handle the absence of i2c during early > > boot? > > Interestingly enough, they appear to do fine, despite the linking > order. Maybe because i2c_init is a subsys_initcall() while framebuffer > drivers are initialized with module_init()? Then I'm not sure why your > own driver has a problem there. > Well, this is only very partially true. Try: rgrep -l subsys_initcall drivers/i2c/ rgrep -l module_init drivers/i2c/ The last of which gives drivers/i2c/busses/i2c-pxa.c for example. I'll change the pxa i2c driver to subsys_initcall and try if that works when I get back to my desk tomorrow. regards, Uli _______________________________________________ i2c mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/i2c
