Jean Delvare wrote:
> The new-style lm93 driver implements the optional detect() callback
> to cover the use cases of the legacy driver.
>
> Signed-off-by: Jean Delvare <[EMAIL PROTECTED]>
> Cc: Mark M. Hoffman <[EMAIL PROTECTED]>
> Cc: Eric J. Bowersox <[EMAIL PROTECTED]>
> Cc: Carsten Emde <[EMAIL PROTECTED]>
> Cc: Hans J. Koch <[EMAIL PROTECTED]>
Looks good,
Acked-by: Hans de Goede <[EMAIL PROTECTED]>
Regards,
Hans
> ---
> drivers/hwmon/lm93.c | 126
> +++++++++++++++++++++++---------------------------
> 1 file changed, 60 insertions(+), 66 deletions(-)
>
> --- linux-2.6.26-rc9.orig/drivers/hwmon/lm93.c 2008-07-12
> 09:20:29.000000000 +0200
> +++ linux-2.6.26-rc9/drivers/hwmon/lm93.c 2008-07-12 10:27:15.000000000
> +0200
> @@ -200,7 +200,6 @@ struct block1_t {
> * Client-specific data
> */
> struct lm93_data {
> - struct i2c_client client;
> struct device *hwmon_dev;
>
> struct mutex update_lock;
> @@ -2501,45 +2500,14 @@ static void lm93_init_client(struct i2c_
> "chip to signal ready!\n");
> }
>
> -static int lm93_detect(struct i2c_adapter *adapter, int address, int kind)
> +/* Return 0 if detection is successful, -ENODEV otherwise */
> +static int lm93_detect(struct i2c_client *client, int kind,
> + struct i2c_board_info *info)
> {
> - struct lm93_data *data;
> - struct i2c_client *client;
> -
> - int err = -ENODEV, func;
> - void (*update)(struct lm93_data *, struct i2c_client *);
> -
> - /* choose update routine based on bus capabilities */
> - func = i2c_get_functionality(adapter);
> - if ( ((LM93_SMBUS_FUNC_FULL & func) == LM93_SMBUS_FUNC_FULL) &&
> - (!disable_block) ) {
> - dev_dbg(&adapter->dev,"using SMBus block data transactions\n");
> - update = lm93_update_client_full;
> - } else if ((LM93_SMBUS_FUNC_MIN & func) == LM93_SMBUS_FUNC_MIN) {
> - dev_dbg(&adapter->dev,"disabled SMBus block data "
> - "transactions\n");
> - update = lm93_update_client_min;
> - } else {
> - dev_dbg(&adapter->dev,"detect failed, "
> - "smbus byte and/or word data not supported!\n");
> - goto err_out;
> - }
> + struct i2c_adapter *adapter = client->adapter;
>
> - /* OK. For now, we presume we have a valid client. We now create the
> - client structure, even though we cannot fill it completely yet.
> - But it allows us to access lm78_{read,write}_value. */
> -
> - if ( !(data = kzalloc(sizeof(struct lm93_data), GFP_KERNEL))) {
> - dev_dbg(&adapter->dev,"out of memory!\n");
> - err = -ENOMEM;
> - goto err_out;
> - }
> -
> - client = &data->client;
> - i2c_set_clientdata(client, data);
> - client->addr = address;
> - client->adapter = adapter;
> - client->driver = &lm93_driver;
> + if (!i2c_check_functionality(adapter, LM93_SMBUS_FUNC_MIN))
> + return -ENODEV;
>
> /* detection */
> if (kind < 0) {
> @@ -2548,7 +2516,7 @@ static int lm93_detect(struct i2c_adapte
> if (mfr != 0x01) {
> dev_dbg(&adapter->dev,"detect failed, "
> "bad manufacturer id 0x%02x!\n", mfr);
> - goto err_free;
> + return -ENODEV;
> }
> }
>
> @@ -2563,31 +2531,61 @@ static int lm93_detect(struct i2c_adapte
> if (kind == 0)
> dev_dbg(&adapter->dev,
> "(ignored 'force' parameter)\n");
> - goto err_free;
> + return -ENODEV;
> }
> }
>
> - /* fill in remaining client fields */
> - strlcpy(client->name, "lm93", I2C_NAME_SIZE);
> + strlcpy(info->type, "lm93", I2C_NAME_SIZE);
> dev_dbg(&adapter->dev,"loading %s at %d,0x%02x\n",
> client->name, i2c_adapter_id(client->adapter),
> client->addr);
>
> + return 0;
> +}
> +
> +static int lm93_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct lm93_data *data;
> + int err, func;
> + void (*update)(struct lm93_data *, struct i2c_client *);
> +
> + /* choose update routine based on bus capabilities */
> + func = i2c_get_functionality(client->adapter);
> + if (((LM93_SMBUS_FUNC_FULL & func) == LM93_SMBUS_FUNC_FULL) &&
> + (!disable_block)) {
> + dev_dbg(&client->dev, "using SMBus block data transactions\n");
> + update = lm93_update_client_full;
> + } else if ((LM93_SMBUS_FUNC_MIN & func) == LM93_SMBUS_FUNC_MIN) {
> + dev_dbg(&client->dev, "disabled SMBus block data "
> + "transactions\n");
> + update = lm93_update_client_min;
> + } else {
> + dev_dbg(&client->dev, "detect failed, "
> + "smbus byte and/or word data not supported!\n");
> + err = -ENODEV;
> + goto err_out;
> + }
> +
> + data = kzalloc(sizeof(struct lm93_data), GFP_KERNEL);
> + if (!data) {
> + dev_dbg(&client->dev, "out of memory!\n");
> + err = -ENOMEM;
> + goto err_out;
> + }
> + i2c_set_clientdata(client, data);
> +
> /* housekeeping */
> data->valid = 0;
> data->update = update;
> mutex_init(&data->update_lock);
>
> - /* tell the I2C layer a new client has arrived */
> - if ((err = i2c_attach_client(client)))
> - goto err_free;
> -
> /* initialize the chip */
> lm93_init_client(client);
>
> err = sysfs_create_group(&client->dev.kobj, &lm93_attr_grp);
> if (err)
> - goto err_detach;
> + goto err_free;
>
> /* Register hwmon driver class */
> data->hwmon_dev = hwmon_device_register(&client->dev);
> @@ -2597,43 +2595,39 @@ static int lm93_detect(struct i2c_adapte
> err = PTR_ERR(data->hwmon_dev);
> dev_err(&client->dev, "error registering hwmon device.\n");
> sysfs_remove_group(&client->dev.kobj, &lm93_attr_grp);
> -err_detach:
> - i2c_detach_client(client);
> err_free:
> kfree(data);
> err_out:
> return err;
> }
>
> -/* This function is called when:
> - * lm93_driver is inserted (when this module is loaded), for each
> - available adapter
> - * when a new adapter is inserted (and lm93_driver is still present) */
> -static int lm93_attach_adapter(struct i2c_adapter *adapter)
> -{
> - return i2c_probe(adapter, &addr_data, lm93_detect);
> -}
> -
> -static int lm93_detach_client(struct i2c_client *client)
> +static int lm93_remove(struct i2c_client *client)
> {
> struct lm93_data *data = i2c_get_clientdata(client);
> - int err = 0;
>
> hwmon_device_unregister(data->hwmon_dev);
> sysfs_remove_group(&client->dev.kobj, &lm93_attr_grp);
>
> - err = i2c_detach_client(client);
> - if (!err)
> - kfree(data);
> - return err;
> + kfree(data);
> + return 0;
> }
>
> +static const struct i2c_device_id lm93_id[] = {
> + { "lm93", lm93 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, lm93_id);
> +
> static struct i2c_driver lm93_driver = {
> + .class = I2C_CLASS_HWMON,
> .driver = {
> .name = "lm93",
> },
> - .attach_adapter = lm93_attach_adapter,
> - .detach_client = lm93_detach_client,
> + .probe = lm93_probe,
> + .remove = lm93_remove,
> + .id_table = lm93_id,
> + .detect = lm93_detect,
> + .address_data = &addr_data,
> };
>
> static int __init lm93_init(void)
>
>
_______________________________________________
i2c mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/i2c
