Hi David,
On Sat, 26 Jul 2008 21:38:27 -0700, David Brownell wrote:
> From: David Brownell <[EMAIL PROTECTED]>
>
> Fix various printk format strings where %zd was passed a size_t;
> those should be %zu instead. (Courtesy of a version of GCC which
> warns when these details are wrong.)
>
> Signed-off-by: David Brownell <[EMAIL PROTECTED]>
> ---
> drivers/i2c/chips/at24.c | 8 ++++----
> drivers/i2c/i2c-dev.c | 4 ++--
>
> --- a/drivers/i2c/chips/at24.c 2008-07-26 21:05:14.000000000 -0700
> +++ b/drivers/i2c/chips/at24.c 2008-07-26 21:05:26.000000000 -0700
> @@ -188,7 +188,7 @@ static ssize_t at24_eeprom_read(struct a
> count = I2C_SMBUS_BLOCK_MAX;
> status = i2c_smbus_read_i2c_block_data(client, offset,
> count, buf);
> - dev_dbg(&client->dev, "smbus read [EMAIL PROTECTED] --> %d\n",
> + dev_dbg(&client->dev, "smbus read [EMAIL PROTECTED] --> %d\n",
> count, offset, status);
> return (status < 0) ? -EIO : status;
> }
> @@ -214,7 +214,7 @@ static ssize_t at24_eeprom_read(struct a
> msg[1].len = count;
>
> status = i2c_transfer(client->adapter, msg, 2);
> - dev_dbg(&client->dev, "i2c read [EMAIL PROTECTED] --> %d\n",
> + dev_dbg(&client->dev, "i2c read [EMAIL PROTECTED] --> %d\n",
> count, offset, status);
>
> if (status == 2)
> @@ -334,7 +334,7 @@ static ssize_t at24_eeprom_write(struct
> if (status == 1)
> status = count;
> }
> - dev_dbg(&client->dev, "write [EMAIL PROTECTED] --> %zd (%ld)\n",
> + dev_dbg(&client->dev, "write [EMAIL PROTECTED] --> %zd (%ld)\n",
> count, offset, status, jiffies);
>
> if (status == count)
> @@ -512,7 +512,7 @@ static int at24_probe(struct i2c_client
>
> i2c_set_clientdata(client, at24);
>
> - dev_info(&client->dev, "%Zd byte %s EEPROM %s\n",
> + dev_info(&client->dev, "%zu byte %s EEPROM %s\n",
> at24->bin.size, client->name,
> writable ? "(writable)" : "(read-only)");
> dev_dbg(&client->dev,
> --- a/drivers/i2c/i2c-dev.c 2008-07-26 21:05:14.000000000 -0700
> +++ b/drivers/i2c/i2c-dev.c 2008-07-26 21:05:26.000000000 -0700
> @@ -147,7 +147,7 @@ static ssize_t i2cdev_read (struct file
> if (tmp==NULL)
> return -ENOMEM;
>
> - pr_debug("i2c-dev: i2c-%d reading %zd bytes.\n",
> + pr_debug("i2c-dev: i2c-%d reading %zu bytes.\n",
> iminor(file->f_path.dentry->d_inode), count);
>
> ret = i2c_master_recv(client,tmp,count);
> @@ -175,7 +175,7 @@ static ssize_t i2cdev_write (struct file
> return -EFAULT;
> }
>
> - pr_debug("i2c-dev: i2c-%d writing %zd bytes.\n",
> + pr_debug("i2c-dev: i2c-%d writing %zu bytes.\n",
> iminor(file->f_path.dentry->d_inode), count);
>
> ret = i2c_master_send(client,tmp,count);
Applied, thanks.
--
Jean Delvare
_______________________________________________
i2c mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/i2c
