On Thu, Sep 25, 2008 at 10:53:51AM +0300, Tony Lindgren wrote:
> From: Chandra shekhar <[EMAIL PROTECTED]>
Not very informative description in here. At lease you could have
copied the subject?
> Signed-off-by: chandra shekhar <[EMAIL PROTECTED]>
> Signed-off-by: Tony Lindgren <[EMAIL PROTECTED]>
> ---
> drivers/i2c/busses/i2c-omap.c | 12 +++++++-----
> 1 files changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> index ded4636..b41431a 100644
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -156,7 +156,7 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev
> *i2c_dev, int reg)
>
> static int omap_i2c_get_clocks(struct omap_i2c_dev *dev)
> {
> - if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
> + if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
> dev->iclk = clk_get(dev->dev, "i2c_ick");
> if (IS_ERR(dev->iclk)) {
> dev->iclk = NULL;
> @@ -279,7 +279,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
> psc = fclk_rate / 12000000;
> }
>
> - if (cpu_is_omap2430()) {
> + if (cpu_is_omap2430() || cpu_is_omap34xx()) {
>
> /* HSI2C controller internal clk rate should be 19.2 Mhz */
> internal_clk = 19200;
> @@ -616,7 +616,8 @@ omap_i2c_isr(int this_irq, void *dev_id)
> *dev->buf++ = w;
> dev->buf_len--;
> /* Data reg from 2430 is 8 bit wide */
> - if (!cpu_is_omap2430()) {
> + if (!cpu_is_omap2430() &&
> + !cpu_is_omap34xx()) {
> if (dev->buf_len) {
> *dev->buf++ = w >> 8;
> dev->buf_len--;
> @@ -654,7 +655,8 @@ omap_i2c_isr(int this_irq, void *dev_id)
> w = *dev->buf++;
> dev->buf_len--;
> /* Data reg from 2430 is 8 bit wide */
> - if (!cpu_is_omap2430()) {
> + if (!cpu_is_omap2430() &&
> + !cpu_is_omap34xx()) {
> if (dev->buf_len) {
> w |= *dev->buf++ << 8;
> dev->buf_len--;
> @@ -748,7 +750,7 @@ omap_i2c_probe(struct platform_device *pdev)
> if (cpu_is_omap15xx())
> dev->rev1 = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) < 0x20;
>
> - if (cpu_is_omap2430()) {
> + if (cpu_is_omap2430() || cpu_is_omap34xx()) {
> u16 s;
>
> /* Set up the fifo size - Get total size */
> --
> 1.5.6.rc3.21.g8c6b5
>
>
> _______________________________________________
> i2c mailing list
> [email protected]
> http://lists.lm-sensors.org/mailman/listinfo/i2c
--
Ben ([EMAIL PROTECTED], http://www.fluff.org/)
'a smiley only costs 4 bytes'
_______________________________________________
i2c mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/i2c
