==================================================================== Author Name: Ruediger Schmidt Contact Email Address: [email protected] WebSite: http://DrawingSecrets.com Category: Visual Arts, Arts and Crafts, Crafts, Painting, Drawing Description: It's possible you've discovered this yourself: it is definitely challenging to draw the diverse elements of a person's face. It normally takes lots of exercise to create nice and vibrant noses, eyes, mouth and locks. But even if you mastered these competencies it is not just about all you need for painting portraits! Keywords: draw a portrait, how to draw a portrait, learn to draw, portrait drawing Word Count: 1329
==================================================================== Article Content: Maybe you have experienced this your self: it's definitely complicated to sketch the diverse parts of a human face. It calls for a lot of practice to produce nice and vibrant noses, eyes, mouth and hair. But even if you perfected these talents it's not just about all you will need for drawing portraits! Putting together these diverse items into a picture of a face is sometimes more complicated. Just about all items ought to be on the right location. And what may make it sometimes more complicated is symmetry: it's not enough to sketch one eye on the right location, the other eye has to be in correct location, also ... and both eyes has to be symmetrical. The very same is correct for the mouth area, the nasal area, the ears and so on. Not meeting to produce symmetry (possibly by slight differences) may make the face look clumsy and distorted. So how can this be resolved and prevented? It is just about all about utilizing helper lines to produce a initial design to lead you. While looking frontally at a face or a face you observe, you can without difficulty add some lines to locate the appropriate positions for just about all details: - One line through the centre of the face - alongside the axis of the nasal area - One line thru the eyes ... in the middle-height of the head - On this line in between the eyes has to be enough room so a 3 rd eye can fit in - The nasal area tip is halfway in between the eyeline and the chin or at one 3 rd of the head's height - The mouth's location is about 2/3 to halfway in between the nosetip and the chin Sounds simple? Well it really is, but merely as long as you sketch faces in perfect frontal view. And that is definitely the cause for almost all difficulties beginning face artists face! Most likely you are trying to sketch faces in some sort of non-frontal view. As soon as you attempt this just about all the simple helper lines I told you about will need to be adapted to comply with the three dimensional form of the face. So you better utilize these steps: a) You get started using an egg form for the head. The point will be the chin so it should point to the bottom. b) Now we bring in the vertical centre line that runs through there where the nasal area will need to be. But on this occasion it is a curve following the egg form of the head c) Then imagine the egg to be sliced horizontally in two parts. That's where the eye-line appears d) On the eye line create some marks where the eyes ought to be positioned (bear in mind to leave enough room in between for a 3 rd eye). You should not forget to take the foreshortening under consideration, the eye that is on the contrary side of the face will seem much smaller. e) For the nasal area tip and the lips location some little marks on the centre line accordingly f) At this point you understand where to create which parts of the face, you just will need to insert the details g) To make sure that the details never seem far too flat, provide them a detailed and shaded shape and also create some more details for the eye brows, the edge of the nasal area and the lips Using these ways will help you greatly to put the parts together. Also you can utilize this to sketch a initial sketch for portraits that should appear like a specific person. Just sketch the details and appropriate their location and proportions until the sketch has a resemblance to the original. And then and only then it's okay to get started filling in the details. ==================================================================== Author Biography: Get more tutorials to learn <a href="http://drawingsecrets.com/how-to-draw/how-to-draw-portraits/how-to-draw-a-portrait-in-a-symmetric-and-consistent-form.html";>how to draw a portrait</a>! Visit us and acquire a totally free booklet to <a href="http://drawingsecrets.com";>learn to draw</a> ==================================================================== *** Digital Reprint Rights *** * You are not allowed to change anything in Article Content and Author Biography except the format for displaying the article properly. * You are allowed to use this article for free as long as it will not violate any laws. * I will appreciate it if you can notify me the publication of this article. I can be reached at [email protected].
