Some new Thinkpads have a new improved performance mode available.
Add support to make this mode usable.
To avoid having to create a new profile, just use the improved performance
mode in place of the existing performance mode, when available.
Tested on T14 AMD G4 AMD.
Signed-off-by: Mark Pearson <mpearson-len...@squebb.ca>
---
drivers/platform/x86/thinkpad_acpi.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/platform/x86/thinkpad_acpi.c
b/drivers/platform/x86/thinkpad_acpi.c
index ad460417f901..eba701ab340e 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -10136,6 +10136,7 @@ static struct ibm_struct proxsensor_driver_data = {
#define DYTC_CMD_SET 1 /* To enable/disable IC function mode */
#define DYTC_CMD_MMC_GET 8 /* To get current MMC function and mode */
+#define DYTC_CMD_UP_CAP 0xA /* To get Ultra-performance capability */
#define DYTC_CMD_RESET 0x1ff /* To reset back to default */
#define DYTC_CMD_FUNC_CAP 3 /* To get DYTC capabilities */
@@ -10152,6 +10153,7 @@ static struct ibm_struct proxsensor_driver_data = {
#define DYTC_FUNCTION_STD 0 /* Function = 0, standard mode */
#define DYTC_FUNCTION_CQL 1 /* Function = 1, lap mode */
+#define DYTC_FUNCTION_TMS 9 /* Function = 9, TMS mode */
#define DYTC_FUNCTION_MMC 11 /* Function = 11, MMC mode */
#define DYTC_FUNCTION_PSC 13 /* Function = 13, PSC mode */
#define DYTC_FUNCTION_AMT 15 /* Function = 15, AMT mode */
@@ -10163,11 +10165,14 @@ static struct ibm_struct proxsensor_driver_data = {
#define DYTC_MODE_MMC_LOWPOWER 3 /* Low power mode */
#define DYTC_MODE_MMC_BALANCE 0xF /* Default mode aka balanced */
#define DYTC_MODE_MMC_DEFAULT 0 /* Default mode from MMC_GET, aka balanced */
+#define DYTC_NOMODE 0xF /* When Function does not have a mode */
#define DYTC_MODE_PSC_LOWPOWER 3 /* Low power mode */
#define DYTC_MODE_PSC_BALANCE 5 /* Default mode aka balanced */
#define DYTC_MODE_PSC_PERFORM 7 /* High power mode aka performance */
+#define DYTC_UP_SUPPORT_BIT 8 /* Bit 8 - 1 = supported, 0 = not */
+
#define DYTC_ERR_MASK 0xF /* Bits 0-3 in cmd result are the error
result */
#define DYTC_ERR_SUCCESS 1 /* CMD completed successful */
@@ -10185,6 +10190,7 @@ static enum platform_profile_option
dytc_current_profile;
static atomic_t dytc_ignore_event = ATOMIC_INIT(0);
static DEFINE_MUTEX(dytc_mutex);
static int dytc_capabilities;
+static bool dytc_ultraperf_cap; /* ultra performance capable */
static bool dytc_mmc_get_available;
static int profile_force;
@@ -10355,6 +10361,17 @@ static int dytc_profile_set(struct
platform_profile_handler *pprof,
if (err)
goto unlock;
+ /* Set TMS mode appropriately (enable for performance), if available */
+ if (dytc_ultraperf_cap) {
+ int cmd;
+
+ cmd = DYTC_SET_COMMAND(DYTC_FUNCTION_TMS, DYTC_NOMODE,
+ profile == PLATFORM_PROFILE_PERFORMANCE);
+ err = dytc_command(cmd, &output);
+ if (err)
+ return err;
+ }
+
if (dytc_capabilities & BIT(DYTC_FC_MMC)) {
if (profile == PLATFORM_PROFILE_BALANCED) {
/*
@@ -10429,6 +10446,7 @@ static struct platform_profile_handler dytc_profile = {
static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
{
int err, output;
+ int cmd;
/* Setup supported modes */
set_bit(PLATFORM_PROFILE_LOW_POWER, dytc_profile.choices);
@@ -10484,6 +10502,16 @@ static int tpacpi_dytc_profile_init(struct
ibm_init_struct *iibm)
dbg_printk(TPACPI_DBG_INIT, "No DYTC support available\n");
return -ENODEV;
}
+ err = dytc_command(DYTC_CMD_UP_CAP, &output);
+ dytc_ultraperf_cap = output & BIT(DYTC_UP_SUPPORT_BIT) ? true : false;
+ if (dytc_ultraperf_cap) {
+ pr_debug("TMS is supported\n");
+ /* Disable TMS by default - only use with performance mode */
+ cmd = DYTC_SET_COMMAND(DYTC_FUNCTION_TMS, DYTC_NOMODE, 0);
+ err = dytc_command(cmd, &output);
+ if (err)
+ return err;
+ }
dbg_printk(TPACPI_DBG_INIT,
"DYTC version %d: thermal mode available\n",
dytc_version);
--
2.41.0
_______________________________________________
ibm-acpi-devel mailing list
ibm-acpi-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ibm-acpi-devel
