Ok, I think this is what I'm going to do. I'll make sure that CSF is in SYSSTC. Then on LPAR1 I'll start csf. I already initialized the ckds/pkds and have defined my master keys. On LPAR2 I'll start csf using the same ckds/pkds and initialize it? Or do I just recreate the master keys for that LPAR?
-----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Mark Zelden Sent: Wednesday, June 22, 2005 1:52 PM To: [email protected] Subject: Re: ICSF On Wed, 22 Jun 2005 19:17:38 +0200, R.S. <[EMAIL PROTECTED]> wrote: >Mark Zelden wrote: > >> On Tue, 21 Jun 2005 13:49:22 -0500, Ward, Mike S <[EMAIL PROTECTED]> wrote: >> >> >>>One other thing. If I set up the keys in 1 LPAR can the other LPAR >>>use them or do I have to go through the process for each LPAR? >>> >> >> >> Since the LPARs are on the same CEC (box), then you don't have to do >> anything. If they were on separate CECs, then you would go through >> the same process to load the master keys, but you don't re-init the >> CKDS (INIT CKDS ==> N). > >Do you mean ICSF initialization ? >IMHO it doesn't matter same CEC or no. You have to initialize ICSF on >every LPAR independently. In fact initialization process consist of >entering master keys and optionally initialization CKDS/PKDS. If you >want to share the keys, then you should share CKDS/PKDS and enter the >same master keys on every LPAR (CEC doesn't matter) using it. >HTH >Regards >-- >Radoslaw Skorupka >Lodz, Poland > Mike, Radoslaw is correct. It's been a long time since I've done this and the last several times all of the sharing LPARs were on seperate CECs anyway. Pehaps I can claim I was having a senior moment. :-) I should have looked at the doc in my install PDS (which also mentioned putting the CSF STC in SYSSTC). Regards, Mark -- Mark Zelden Sr. Software and Systems Architect mailto: [EMAIL PROTECTED] Systems Programming expert at http://Search390.com/ateExperts/ Mark's MVS Utilities: http://home.flash.net/~mzelden/mvsutil.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
