You can vary offline a console just like it was an old fashioned 3174 console. The &SYSNAME.060 is replaced by e. g. ZOS1060 assumed that the defined system name is ZOS1. This name you should use for the VARY command. But I think, that the problem is in the emulation session. I would try to restart the emulation session and afterwards V <console device>,CONSOLE.
Hope this helps Franz Josef Pohlen ----- Original Message ----- From: "Anne Crabtree" <[EMAIL PROTECTED]> Newsgroups: bit.listserv.ibm-main To: <[email protected]> Sent: Wednesday, August 31, 2005 4:04 PM Subject: OSA-ICC console question > We are using OSA-ICC as a controller for our consoles on a z890 machine. > We have four lpars and the pc is set up with four console sessions and four 3270 sessions. This morning, one console session was frozen, but the others seemed fine. We wanted to take only that one console offline, but were hesitant to vary the unit offline fearing it would affect the other consoles. The console sessions are defined in parmlib as &SYSNAME.060. > It ended up working itself out, but could we have entered something like: > > V CN(&sysname.060),OFFLINE > > from a working console for the console that was frozen and then do the same varying ONLINE? > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html > > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
