Hi Dana, we had a similar problem and looked at both freeware and alternative low cost solutions for this. In our case we have two CEC each with four LPARs. After experimenting with TSSO our management rejected it, because we could not afford to make a system programmer resource available to update and maintain it. I believe that it may be possible to re-write some of the code to do this, but I was told to leave it and instead concentrate on looking at alternative technologies. There are some very credible programs out there that you may wish to look at which can be downloaded from the internet. You may have to do a google search to find them, but take a look for Szyzgy and Exspans AutoMan. The Szygy product is a very credible replacement for TSSO and the Exspans product is popular in Europe as a replacement for Netview. In the end we did chose one of these and have been happily using it for a couple years now. The big advantage is the level of support that we got for setup, we never technical problems, and really only needed advice on the best ways to do things.
On Tue, Aug 11, 2009 at 7:59 PM, Dana Mitchell <mitchd...@gmail.com> wrote: > Hello, > We are considering replacing Netview for simple message automation with > TSSO > from the CBT tape. I have it up and running successfully but I have one > question. Currently we have two Netview subsystems running on two members > of a sysplex, each processing messages from a subset of sysplex members. > Is there a way to duplicate this setup, having TSSO process only messages > from a subset of sysplex members? or alternately, be able to identify > what > system a message was issued from in TSSO processing? > > thanks > Dana > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html