Hi All, We need Cascaded switches as we are trying to connect a z9 to a TS7740 at a remote site through two switches across a DWDM.
The Domain ID's are 65,66,67 and 68. 65 and 67 are Ficon channel attached and the other 2 66 and 68 are connected to the CU's. Now the Channel end should just be the domain id? is this Hex or Decimal. It looks like although I have defined 65 and 67 it's getting reported as x'41' and x'43'. The CU end is a connection between the switch and the TS7740 and is supposed to defined as xxyy where xx is the switch address and yy is the port. This is being reported as 6608 and 6808. Now what I dont know is if 66 and 68 is the Switch address or if x'41' and x'43' is the switch id required by HCD. What number is supposed to be Hex and which one decimal. It's all a bit confusing??? Regards, Phil. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
