There is a whitepaper available on Powerlink that discusses implementing HyperPAV on DMX-3 and DMX-4.
There are a few re-req's and limitations ... mostly to comply with IBM's requirements. Without this being a complete list ... 1. CU's must be defined as 2107 (not 2105). If your CUs are 2105 they can be changed to 2107 however this is an *offline* change 2. Even if you have multiple 'splits' in your DMX each LCU *must* have a unique CUADD 3. Needs Enginuity 5773 Cheers, Chris -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of gsg Sent: Tuesday, 11 August 2009 7:46 AM To: [email protected] Subject: Hyper-PAVs Anyone using Hyper PAvs with EMC DMX or know where to find information on implementing Hyper PAVs? We are currently using Dynamic PAVs on z/OS 1.9 and EMC DMX-3. TIA ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
