The SETPROG LPA command just loads modules. It doesn't update pointers to exits, SVCs, etc.
There are a number of discussions in the archives on the steps to activate an updates SMF exit using SETPROG LPA and EXITS options. If you search on SETPROG LPA EXIT here http://bama.ua.edu/cgi-bin/wa?S1=ibm-main you will find what you want including this useful post http://bama.ua.edu/cgi-bin/wa?A2=ind0504&L=ibm-main&P=R32715&I=1 AMBLIST won't. Confirmed by searching IBMLink using the keywords "LISTLPA Dynamic" to locate OW40937. APAR Identifier ...... OW40937 Last Changed ........ 99/10/18 AMBLIST LISTLPA DOES NOT SUPPORT DYNAMIC LPA FUNCTION: CURRENT WORKAROUND AND INFORMATION Symptom ...... DD DD Status ........... CLOSED DOC Severity ................... 3 Date Closed ......... 99/10/18 Component .......... 5695DF108 Duplicate of ........ Reported Release ......... 1C0 Fixed Release ............ Component Name DFSMS/MVS PROG Special Notice Current Target Date ..99/12/08 Flags SCP ................... Platform ............ Status Detail: APARCLOSURE - APAR is being closed. PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: AMBLIST LISTLPA does not support the dynamic LPA feature. AMBLIST has been retained for compatibility with existing customer procedures. Customers should switch to the use of LPAMAP under IPCS (See OS/390 MVS IPCS Commands) in order to gain support for dynamic LPA. . However, customers should also be aware that APAR OW37427 and in obscure cases OW37790 must be applied to their system in order to use the IPCS LPAMAP command. LOCAL FIX: PROBLEM SUMMARY: **************************************************************** * USERS AFFECTED: Users of the LISTLPA amblist control * * statement. * **************************************************************** * RECOMMENDATION: * **************************************************************** Amblist LISTLPA does not support dynamic LPA. This restriction is not documented in the MVS Diagnosis: Tools and Service Aids manual. PROBLEM CONCLUSION: Amblist LISTLPA does not support dynamic LPA. The current LISTLPA support in amblist will be maintained but it will not be upgraded in support of new function. The recommended replacement is the LPAMAP subcommand of IPCS. I hope that helps. Best Regards, Sam Knutson, GEICO Performance and Availability Management mailto:[EMAIL PROTECTED] (office) 301.986.3574 "Think big, act bold, start simple, grow fast..." -----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of John Norgauer Sent: Thursday, November 10, 2005 12:34 PM To: [email protected] Subject: SETPROG Command question What are the limitations/restrictions of the SETPROG LPA command? Trying to add my IEFACTRT routine using this command, I get the following: CSV551I 09.24.46 LPA ADD 913 SUCCESSFUL: 1 UNSUCCESSFUL: 0 NOT PROCESSED: 0 MODULE RESULT IEFACTRT SUCCESSFUL However, when I do a LISTLPA command using AMBLIST, there is no entry for IEFACTRT. THANKS John Norgauer University of California Davis Medical Center 2315 Stockton Blvd ASB 1300 Sacramento, Ca 95817 916-734-0536 SYSTEMS PROGRAMMING...... Guilty, until proven innocent !! " JN 2004 ........ "Hardware eventually breaks - Software eventually works" anon ........ <> ==================== This email/fax message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution of this email/fax is prohibited. If you are not the intended recipient, please destroy all paper and electronic copies of the original message. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
