No, look at the MACRO and try to reverse engineer the module in the MACRO. Shai
On Sat, Jun 11, 2011 at 1:38 PM, Lindy Mayfield <[email protected]>wrote: > Do you have some good documentation for STARTIO? > > ________________________________ > From: shai hess [[email protected]] > Sent: 11 June 2011 10:15 > To: IBM Mainframe Discussion List (E-mail) > Subject: MFNetDisk first results of stacked CCWs > > HI, > > After massive code changes and creating the new MFNetDisk PRO version 13, > I advance to point of being able to run jobs. > Be aware that the MFNetDisk PC side will be able to run MFNetDisk PRO and > the standard MFNetDisk code version 12. > I run jobs which doing DX (x63), LOCATE(x47), and one format write 4k > block(x1d) for disk emulation. > The improvement in IO rate is 100%, meaning I almost double the IO rate > per second!!! > That mean that I ran this job before with 85 IO per second. > Now with the new stacked CCWs I run 160 IO per second. > If you add more CCWs to the chain the improvement will be much higher. > > Be aware that now the MFNetDisk run in his basic code, meaning much more > can be done to improve more the IO. > > Thanks, > Shai > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
