Hi all,
I have my CICS region load modules installed in a volume which resides in
emulated OS/2 H drive. The CICS regions were all working fine, but now I
faced a problem when I was doing an IPL, during IPL it says -
* IGGN505A SPECIFY UNIT FOR CICSTS31.CICS.SDFHLOAD ON MVSRES OR CANCEL
IEE600I REPLY TO 00 IS;0B81
IGGN306I 0B81,UNIT UNACCEPTABLE, 00000004
* IGGN505A SPECIFY UNIT FOR CICSTS31.CICS.SDFHLOAD ON MVSRES OR CANCEL
IEE600I REPLY TO 00 IS;0B82
IGGN306I 0B82,UNIT UNACCEPTABLE, 00000004
* IGGN505A SPECIFY UNIT FOR CICSTS31.CICS.SDFHLOAD ON MVSRES OR CANCEL
IEE600I REPLY TO 00 IS;CANCEL
IEA716I UNABLE TO MOUNT VOLUME - LNKLST DATA SET IGNORED
CICSTS31.CICS.SDFHLOAD
IEA716I UNABLE TO MOUNT VOLUME - LNKLST DATA SET IGNORED
SYS1.CICSTS31.CICS.SDFHLINK
As above I tried replying with the unit numbers but of no use.
Then I issued the following commands to know the status -
D M=DEV(B81)
IEE174I 00.06.05 DISPLAY M 036
DEVICE 0B81 STATUS=OFFLINE
CHP FC
DEST LINK ADDRESS 00
PATH ONLINE Y
CHP PHYSICALLY ONLINE Y
PATH OPERATIONAL N
PATHS NOT VALIDATED
----------------------------------------------------------------
V 0B81,ONLINE
IEE103I UNIT 0B81 NOT BROUGHT ONLINE 038
IEE763I NAME= IECVIOPM CODE= 0000000400000000
IOS551I NO PATHS PHYSICALLY AVAILABLE
IEE764I END OF IEE103I RELATED MESSAGES
----------------------------------------------------------------
V PATH(0B81,FC),ONLINE
IEE386I PATH(0B81,FC) NOT BROUGHT ONLINE 040
IEE763I NAME= IECVIOPM CODE= 0000000400000000
IOS552I PATH NOT PHYSICALLY AVAILABLE
IEE764I END OF IEE386I RELATED MESSAGES
----------------------------------------------------------------
CF CHP(FC),ONLINE
IEE712I CONFIG PROCESSING COMPLETE
----------------------------------------------------------------
V PATH(0B81,FC),ONLINE
IEE386I PATH(0B81,FC) NOT BROUGHT ONLINE 044
IEE763I NAME= IECVIOPM CODE= 0000000400000000
IOS552I PATH NOT PHYSICALLY AVAILABLE
IEE764I END OF IEE386I RELATED MESSAGES
----------------------------------------------------------------
DS P,0B81
RESPONSE=P390
IEE459I 02.07.01 DEVSERV PATHS 006
UNIT DTYPE M CNT VOLSER CHPID=PATH STATUS
RTYPE SSID CFW TC DFW PIN DC-STATE CCA DDC ALT CU-TYPE
0B81,3390 ,F,000, ,FC=<
************************ SYMBOL DEFINITIONS ************************
F = OFFLINE < = PHYSICALLY UNAVAILABLE
Then I went into the OS/2 system menu and it show me the drives.
H: drive appears, but when I click on it, I get an error message:
"Path H: cannot be found. Make sure drive path is correct."
What I have to do to rectify this problem ?
Please help in this problem..
Thanks in Advance,
-Jerry
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
