I'd look for the root problem - why the clusters are not being closed properly by the last to access them. This could be a window for logical corruption.
-----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of jagadishan perumal Sent: Thursday, July 14, 2011 7:51 AM To: [email protected] Subject: Cluster is Open during backup Hi Group, During the back up I see some Cluster are open during Backup. To close the CLUSTER i use the VERIFY command and after that the Cluster gets closed properly. Are there any way where i can close all the CLUSTERS which were not closed properly and run the back up successfully. Please advise me your expert comment on this . Regards, Jags ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html NOTICE: This electronic mail message and any files transmitted with it are intended exclusively for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged information. Any unauthorized review, use, printing, saving, copying, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
