Folks,
As a final closure on this issue, I did find what was causing my I/O
errors between the two channel attached SCTCs. It was a timing issue.
The error occured when either of the programs on the two LPARs issued a
write prior to the read being issued on the other side of the SCTC
link. By inserting a delay in each of the programs where they turn
around from input to output, I was able to elliminate the IOEs that were
being generated. A special thanks to Mike Kerford-Byrnes whom I had an
extended discussion with off list.
Thanks,
Steve A.
Steve Arnett wrote:
Thanks to everyone that responded.
Bruno Sugliani wrote:
have a look around page 3.3
could be helpfull
Watch the wrap
http://www-1.ibm.com/support/docview.wss?uid=isg29fafd2510f68d17285256ced0051213e&aid=1
Bruno
Bruno(dot)sugliani(at)groupemornay(dot)asso(dot)fr
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
