ty Vernooij and Tom. Per Vernooij's advice:
The IEA705I message shows that NETMENU is failing on an unconditional GETMAIN fixed request for 20K in LSQA (subpool 229) below the line in both the first and second occurrence. The Private Area is maxed out at 10M. It should be no more than 2M. So it looks like the Private Area is the culprit as Tom thought was more likely. If so, I suppose LSQA had no room to grow. I guess it is time to look at the source code of NETMENU. It should not be asking for so much below the line. 00E51600 00005000 E5 - subpool 229 16 - 1 (Below the line), 6 (Unconditional GETMAIN on Page Boundary) 5000 - 20K O101N 0020000 O101 11304 07:13:05.18 STC33470 00000080 IEA705I ERROR DURING GETMAIN SYS CODE = 878-10 NETMENU NETMENU 00 O101N 0020000 O101 11304 07:13:05.18 STC33470 00000080 IEA705I 00F44880 009C9D90 009C9D90 00E51600 00005000 -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Tom Marchant Sent: Tuesday, November 01, 2011 3:32 PM To: IBM-MAIN@bama.ua.edu Subject: Re: S878 RC 10 Above or Below the Line? Private or LSQA? On Tue, 1 Nov 2011 18:31:29 +0000, Henke, George wrote: >Getting this on a home grown session manager. It shows >9.7 M out of 10 M allocated below and 90 M above. We have >an IEFUSI installed. I suspect the problem is below the line >since the session manager normally uses under 2 M. > >Some are speculating it LSQA is the problem, but if that were >the case we should get RC 0C Suspicion and speculation are not helpful. The only way to find out is to examine the storage utilization in a dump. >Any way this could be an LSQA problem even though it is RC 10? Yes. You could have something that is sucking up LSQA so that when a low private request is made it fails. LSQA utilization can limit the available private. IMO, it is more likely that it is private. >Any other ideas? Yes. Read the dump. Don't guess. Analyze the storage utilization. -- Tom Marchant ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
