We do. Mostly out of application cautiousness. Much like still IPLing to go backwards in time in the fall.
_________________________________________________________________ Dave Jousma Assistant Vice President, Mainframe Services [email protected] 1830 East Paris, Grand Rapids, MI 49546 MD RSCB2H p 616.653.8429 f 616.653.2717 -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Dazzo, Matt Sent: Monday, January 23, 2012 10:55 AM To: [email protected] Subject: Re: Set Clock Command I am curious in other shops that use the 'T TIMEZONE' command if they stop batch work before issuing the command. Thanks Matt -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Staller, Allan Sent: Monday, November 21, 2011 3:29 PM To: [email protected] Subject: Re: Set Clock Command You got it. The XCF couple dataset uses the stamp from the GMT clock. Instead of SET CLOCK= twice a year, you would issue SET TIMEZONE twice a year . Check the fine manuals for details on SET TIMEZONE. The TIMEZONE value should also be set in CLOCKxx. Since resetting the hardware clock will require a Power On Reset, there is no additional impact. Of course, you can eliminate the HW clock/Power On Reset by fudging the TIMEZONE values. NOTE: The XCF couple dataset cannot handle the back time change. It "remembers" the last time it was used and will fail the IPL if the timestamps are not in ascending sequence. I would allocate a new set of XCF couple datasets and IPL with those (or wait 5 hours for the IPL). After IPL, you can dynamically migrate back to the original files if desired. HTH, <snip> I have been looking at the set clock command in hopes of maybe eliminating the IPL. From reading the good old book I think I have to do the following. Anything else I am missing or should be aware of? How does the DASD XCF dataset handle the time change when going back 1 hr? Thanks Matt 1.Set the SE clock to GMT 2. Change the TIMEZONE to -5 for EST </snip> ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
