Hi, Scott-
No changes in Sequence, no new products.... will continue to look for
timing.
Thanks!
Cheryl
-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[email protected]] On
Behalf Of Scott Ford
Sent: Monday, May 14, 2012 9:35 PM
To: [email protected]
Subject: Re: Netview Question
Cheryl,
Your IPL sequence on any of the LPARS havent changed ? New products ?
Have seen sequence issues before , usually turned out to be timing...
Scott ford
www.identityforge.com
On May 14, 2012, at 3:16 PM, "Meehan, Cheryl" <[email protected]> wrote:
> Scott-
>
> The reason the resource is not available is because the system it is
> attached to is coming down. Which makes sense, because we're IPLing
it.
>
> We have never had this issue prior to this version of the operating
> system. We do not believe we have any cross LPAR Tasks running that
> we have been able to find thus far.
>
> We plan to check next IPL for any cross netview sessions, and see if a
> disconnect is necessary, but it has never been required in the past.
>
> Cheryl
>
> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:[email protected]] On
> Behalf Of Scott Ford
> Sent: Monday, May 14, 2012 1:36 PM
> To: [email protected]
> Subject: Re: Netview Question
>
> Cheryl,
>
> Did you review the SNA messages and codes, that's your fist
> step..sense
> 8002 is a resource not available, maybe a timing issue with the IPL
...
>
> Scott ford
> www.identityforge.com
>
> On May 14, 2012, at 12:21 PM, "Meehan, Cheryl" <[email protected]>
wrote:
>
>> Greetings-
>>
>> We upgraded our operating system to z/os 1.11 last fall. We have
>> IPL'd our Production System twice since then, and each time, we have
>> caused our AUTO1 task to fail on our Test System. Last week, we
>> IPL'd
>
>> our test system, and the AUTO1 task dropped on our Production system.
>> Once recovered, we IPL'd our Test system several more times, and
>> never
>
>> lost AUTO1.
>>
>> The messages that we are seeing are for our EE link between the two
>> system to go down, ( as we are IPLing. . . . ) and then these
>> Messages:
>>
>> MVS2 12134 01:17:32.40 STC35551 00000281 DSI769I MVS02 RPL_EXIT
>> APPCCMD RECEIVE FAILED, LUNAME = MVS01, QUALIFY =
>> X'11', FEEDBACK =
>> (X'4C',X'00',X'80020000')
>> MVS2 12134 01:17:32.40 STC35551 00000281 DSI769I MVS02 RPL_EXIT
>> APPCCMD SEND FAILED, LUNAME = MVS01, QUALIFY =
>> X'07', FEEDBACK =
>> (X'4C',X'00',X'80020000')
>> MVS2 12134 01:17:32.40 STC35551 00000281 DWO575I RMTCMD
> TERMINATED
>> ON CSNET.MVS01 WITH SENSE: X'08A80012'
>> MVS2 12134 01:17:32.40 STC35551 00000281 DSI769I MVS02 RPL_EXIT
>> APPCCMD ALLOC FAILED, LUNAME = MVS01, QUALIFY =
>> X'1F', FEEDBACK =
>> (X'04',X'00',X'087D0001')
>> MVS2 12134 01:17:32.44 STC35551 00000290 IEA631I OPERATOR
AUTO12
>> NOW INACTIVE, SYSTEM=MVS2 , LU=AUTO1
>>
>> If anyone else has had this issue, I would appreciate your insight.
>>
>> Cheryl Meehan
>>
>> ---------------------------------------------------------------------
>> - For IBM-MAIN subscribe / signoff / archive access instructions,
>> send email to [email protected] with the message: INFO IBM-MAIN
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions, send
> email to [email protected] with the message: INFO IBM-MAIN
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions, send
> email to [email protected] with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send
email to [email protected] with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
