Can't we just add to the D LLA command the address of the exit (if active) like we do to the D EXIT,DIAG command?
It would make this task easier (and supported). Mark Jacobs -----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Peter Relson Sent: Wednesday, April 26, 2006 7:37 AM To: [email protected] Subject: Re: LLA Exit One tracing It's rare that I catch Jim Mulder in a glitch, but this was one such time. . SLIP PVTMOD does not work for CSVLLIX1 because the module is loaded to common via LOAD with DE ("directed load") and no CDE is created on the JPQ for such a situation. In order to trace CSVLLIX1 you need to find its address. This information is not available via programming interface or documented control structures. CVT (location x'10') offset 24 contains the address of an area. Part of that area is the LLCB (CVTLLCB). At offset x'34' from the start of that area (this is the offset as of current releases, but there is no guarantee it will stay there from release to release or even after service is applied, but it has been at that offset for a very long time), contains the address of a queue of CDEs. One of those CDEs is a pseudo-CDE for CSVLLIX1 and its CDENTPT field will contain its address. That is the address you need to use. Peter Relson z/OS Core Technology Design ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
