Abdullah, You are providing information which is far too generic with these VTAM messages. The code is for a "Station INOP (inoperative)" condition. This means that something failed between the logic which supports the "local" interface on the logical link and the "remote" interface on the logical link corresponding to your PU definition statement.
There may be more information - probably not much more - in a NetView Hardware Monitor (NPDA) event record - of which you may find a duplicate - in terms of the information it contains - in an EREP MDR record. You should - since Cisco is supposed to provide such wonderful products that the whole world is buying them - find much more precise information in the logs of information provided by the CIP - which I assume exist. Clearly you look for a record corresponding to - or leading up to - the time of the failure which identifies the "local" and "remote" interfaces in some way. If you still cannot solve the problem, perhaps you can say more about what the logical link is that is identified by your switched PU definition statement with name KQB5040. I assume it worked perfectly with the 3745. Then again, you could always throw the CIP out and migrate instead to CCL, the IBM replacement for the 3745, recently upgraded to deal with all the functions missing in the first release. ( http://www-306.ibm.com/software/network/ccl/ ) Chris Mason ----- Original Message ----- From: "Abdullah AlShaalan" <[EMAIL PROTECTED]> Newsgroups: bit.listserv.ibm-main To: <[email protected]> Sent: Saturday, 27 May, 2006 12:23 PM Subject: INOP Received > I always received the following messages since I migrate from IBM-3745 to > CISCO CIP-based. > > IST259I INOP RECEIVED FOR xxxxxxx CODE = 01 > IST619I ID = xxxxxxx FAILED - RECOVERY IN PROGRESS > IST590I CONNECTION TERMINATED FOR PU xxxxxxx ON LINE LLLLLLLL > IST621I RECOVERY SUCCESSFUL FOR NETWORK RESOURCE xxxxxxx > IST590I CONNECTIN ESTABLISHED FOR PU KQB5040 ON LINE LLLLLLLL > > Is there any one have information regarding this issue? ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
