[EMAIL PROTECTED] wrote:
WE have an IP configuration using an OSAE 10/100 base with the
following definitions
DEVICE OSA1 LCS 0C40
LINK OSALNK0X ETHERNET 0 OSA1
;
; ----------------------------
;
; HOME internet (IP) addresses
;
; NOTE:
;
; The IP addresses for the
; the LINK statements thems
;
HOME
10.1.60.101 OSALNK0X
;
START OSA1
We can ping any IP address 10.1.60.x except the gateway which is
10.1.60.1. Our gateway statement is
GATEWAY
;
; Direct Routes - Routes that are directly connected to my interfaces.
;
; Network First Hop Link Name Packet Size Subnet Mask Subnet Value
;10 = VLINK1 4096 0.255.0.0 0.1.0.0
10 = OSALNK0X 4096 0.255.0.0 0.1.0.0
;
We can TELENET from any machine with an address of 10.1.60.x. This used
to work in ZOS 1.5
Something is wrong ARP???
Not sure why ping does not work, but if you have a 10/100 OSA Ethernet
adapter your packet size should be 1500 or less. Typically it would be
either 1500 or 1492. It looks like at one time this device may have
been an Token Ring OSA.
Can the router at 10.1.60.1 ping you?
Any special reason you do not have a default route?
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
