To those who know how PCOMM works Does PCOMM use the specific model device type codes if suitable dimensions are defined and IBM-DYNAMIC otherwise, that is IBM-DYNAMIC is forced when dimensions incompatible with a specific model are specified? This would be a reason IBM-DYNAMIC needed to be specified if the dimensions of a specific model happened to be specified.
Even if the specific model device type codes are presented to the CS IP TN3270 server during TELNET negotiation, the TELNETDEVICE statements can map them to a mode table entry such as D4C32XX3 which specifies the "unspecified screen size BIND", the one characterised by the X'03' in the penultimate byte of the PSERVIC operand. Chris Mason ----- Original Message ----- From: "Ray Mullins" <[EMAIL PROTECTED]> Newsgroups: bit.listserv.ibm-main To: <[email protected]> Sent: Tuesday, 22 August, 2006 5:33 PM Subject: Re: >27x132? > No, it probably doesn't - but what you said makes sense if D4C32XX3 isn't > the default. > > Later, > Ray > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf > Of Hunkeler Peter (KIUB 34) > Sent: Monday August 21 2006 23:12 > To: [email protected] > Subject: Re: >27x132? > > >Interesting - I don't have that specified anywhere in my .ws files. > > I guess it depends on the setup of the TN3270 server. I had to add this line > to get the dynamic logmode. If D4C32XX3 is the default, you don't need it, > but it doesn't hurt either, does it? ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
