You would have to do single object operations from HMC for the CPC you are trying to control. Then you would have to right click on the LPAR IMAGE you would like to issue PSW restart agains and select CP's. Make sure you are only selecting the image you would like your PSW restart directed, if others are selected, then the images are grouped.
HTH Natarajan >>> [EMAIL PROTECTED] 9/19/2006 12:46 PM >>> On Tue, 19 Sep 2006 14:37:38 -0500, McKown, John <[EMAIL PROTECTED]> wrote: >> >> So my question is how do you direct the restart to the desired lpar? >> > >Click on that LPAR's ICON on the HMC screen and make sure that only it >is selected. Just like IPL'ing an LPAR. Thanks John. We were all hesitant to try this (on one of the test lpars) for fear of once again bringing down the production image. We began to try it and it appeared (or so we thought) that the PSW Restart function didn't work when a single profile was selected. I'll have to go back and check this out (not that I don't believe you!!!). Terry Bruns ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
