Thanks to all for the suggestions (and for not pointing out the mangled model number in the subject header).
Carey -----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Gary Sponseller Sent: Tuesday, February 20, 2007 12:55 PM To: [email protected] Subject: Re: 3949 ATL management Carey, You could write a GRW program to identify the tape volumes you wish to eject. Then feed those volumes into a CTSSYNC utility run to actually eject each volume from the ATL. Regards, Gary On 20 Feb 2007, at 12:48 PM, Morris, Carey wrote: > We have a fairly new 3494 ATL that is about to run out of empty tape > slots. To make room for more scratch tapes, I'd like to eject some of > the older lesser used tapes. Is there a utility or command to > simplify > or automate this process? Does anyone have any other suggestions for > insuring plenty of slots for scratch tapes? We're using CA-1 if that > makes a difference. > > > > Thanks, > > Carey Morris > > City of Fort Worth > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
