On Thu, 5 Apr 2007 12:45:51 -0500, Brown, Larry J. <[EMAIL PROTECTED]> wrote:
>Hello, we need to make some changes to our LPARs, taking some weight from one >to add to another. This is the 1st time we will have done this, as the >original config was set up by someone else long gone from the organization. >Looks like this can be done dynamically w/o IPL or POR obviously, but we were >wondering if there was anything we need to be aware of, or if anybody had run >into problems doing this (dynamically), or would we be better off IPL'ing >after making the change? I'm guessing this is routinely performed by others, >but since it is our first time, wanted to check with the experts. > >Machine is a z800, 2066-0A2, z/OS 1.4 on one LPAR, z/Ose 1.4 on the other. > >Thanks, "Just do it". You'll probably want to "change the running system and save to the profile" so the change will be picked up if you ever do a POR or ACTIVATE of the LPAR(s). Mark -- Mark Zelden Sr. Software and Systems Architect - z/OS Team Lead Zurich North America / Farmers Insurance Group: G-ITO mailto:[EMAIL PROTECTED] z/OS and OS390 expert at http://searchDataCenter.com/ateExperts/ Systems Programming expert at http://expertanswercenter.techtarget.com/ Mark's MVS Utilities: http://home.flash.net/~mzelden/mvsutil.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
