On Thu, 17 May 2007 04:46:12 -0500, Mohan <[EMAIL PROTECTED]> wrote: >Hi, > >Here we had activated 2 LPAR's, & need to install the z/OS & subsystems. > >As a first step we are planning to install the z/OS, is there any way i >could build a systempac kinda & use it for future LPAR's. > >For example there is no need of the samplib & other lib's , etc... in the >new LPAR. >Also there are other datasets under z17 HLQ which is not required for >running the z/OS. Is there a approach/process needs to be followed for this, >to identify & isolate them, so that only z/OS runtime lib's are copied in to >the new LPAR to make z/OS run. > >Please send me your valuable sugesstions & any process/downloads(from CBT >etc) followed in your previous installations. > >Thank you for your time. >
I have some examples on my cbt file - file 434 and in the "JOBs" section of my web site (URL below in my signature). If you don't need TCPIP then you can use the ONEPAK* examples - otherwise you need the TWOPAK* examples (which can fit on a single 3390-9). I last updated them for z/OS 1.6 but was just considering updating them for z/OS 1.8. If you are running z/OS 1.7, there are only minor changes that need to be made (new LNKLST lib for example). You can get those from the migration manual and / or looking at one of your 1.7 systems. Cheers, Mark -- Mark Zelden Sr. Software and Systems Architect - z/OS Team Lead Zurich North America / Farmers Insurance Group: G-ITO mailto:[EMAIL PROTECTED] z/OS and OS390 expert at http://searchDataCenter.com/ateExperts/ Systems Programming expert at http://expertanswercenter.techtarget.com/ Mark's MVS Utilities: http://home.flash.net/~mzelden/mvsutil.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
