Tom, The register areas of the formatted SSRB contain all zeroes. This is apparently unusual.
Dave, The area pointed to by SSRBLSDP does not contain the regs. Thx, Bill ----- Original Message ----- From: "David Kreiss" <[EMAIL PROTECTED]> Newsgroups: bit.listserv.ibm-main To: <[email protected]> Sent: Friday, June 29, 2007 10:35 AM Subject: Re: SRB Suspend > Bill, > > I suspect that the registers etc. are in the linkage stack whose address > is in the SSRBLSDP. > > Dave > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On > Behalf Of Bill Hecox > Sent: Friday, June 29, 2007 6:26 AM > To: [email protected] > Subject: SRB Suspend > > Hi, > > I am looking at an SVCDUMP. There is a formatted SSRB of a suspended > SRB. > > I am trying to locate the registers of the SRB execution at the time of > the Suspend. > The SSRB has register fields but they are all 0s except R15 which points > to the address following the SUSPEND call. > > The registers must be saved somewhere. Does someone know where? > > Bill > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
