Is anyone out there using an ICC for IPL'ing their systems? We started to play around with the ICC in our z9 box. We want to use it to eliminate our old 3174's locally we did some preliminary testing with a PC at my desk with a static IP address. We were able to successfully IPL the LPARS on the box with out any problem. Now we want to expand the use of the ICC's we have at our remote DR site (we own the site) and IPL the z9 remotely from our location but we don't want to use a static address.
I've looked through the redbook on the ICC and don't see how we might be able to 'pool' the console so we could IPL from anywhere within our network e.g. behind our firewalls etc. Could anyone who is using an ICC card to IPL their system tell me how they were able to 'pool' the addresses so multiple PC's could IPL and not be static or direct me in the right direction (maybe I didn't read something correctly). If you want to write me off-line that is fine. Thanks Andy Internet: Mailto:[EMAIL PROTECTED] The information contained in this message may be CONFIDENTIAL and is for the intended addressee only. Any unauthorized use, dissemination of the information, or copying of this message is prohibited. If you are not the intended addressee, please notify the sender immediately and delete this message. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
