Howard If the parameter you're changing is in a SETSYS command in the ARCCMD00 member (most are) then just issue that same SETSYS command from either your TSO session (TSO HSEND SETSYS xxxxx) or on the console (F HSM,SETSYS xxxxx)
-----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] Behalf Of Howard Rifkind Sent: 08 August 2007 17:45 To: [email protected] Subject: Refresh ARCCMD00 Questin... I have to make a change to ARCCMD00 and would like it to take effect ASAP. I forgot the command to do this...help BTW, can I do this while HSM is up and running. Thanks folks... ____________________________________________________________________________________ Yahoo! oneSearch: Finally, mobile search that gives answers, not web links. http://mobile.yahoo.com/mobileweb/onesearch?refer=1ONXIC ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html This e-mail message is for the sole use of the intended recipient (s) and may contain confidential and privileged information of Transaction Network Services. Any unauthorised review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. Tranaction Network Services Limited Register No : 2952557 Registered Office: Sheffield Business Park Europa Link Sheffield S9 1XU Directors: R. Low, M Collins, H. Graham (USA), M. Keegan (USA) ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
