Alex, The solution I described goes on covering existing and new data sets as long as you run with EDGUX100 and have the special VRS MV VRSes defined to RMM - no matter what mode you run in.
Verify that the data sets using special EXPDTs list something like this.... Data set name = SUPPORT.VRCYCLEA.C.C01V0021 Volume = B00002 Physical file sequence number = 4 Owner = HSM Data set sequence = 4 Create date = 10/06/1997 Create time = 11:00:11 System ID = EDS1 Expiration date = 10/11/1997 Original expir. date = 00/10/1999 Block size = 32760 Block count = 19 Percent of volume = 0 Total block count = 0 Logical Record Length = 0 Record Format = U Date last written = 10/06/1997 Date last read = 10/06/1997 Job name = HSMABR Last job name = Step name = ABAR0128 Last step name = Program name = Last program name = DD name = SYS00003 Last DD name = Device number = 05A0 Last Device number = Management class = VRS management value = D99010 See 'Original expir. date' and 'VRS management value' VRSEL should continue matching this to VRS D99010 and manage the data set to the defined retention. ... and will continue to to do so until the retention is completed. Mike Wood RMM Development On Tue, 2 Oct 2007 20:15:15 -0500, Alex B Nielsen <[EMAIL PROTECTED]> wrote: >Mike. > >I am right assuming the solution you described , does not cover tapes created >after the switch to RMM in protect mode , after several "VRSEL" runs ?. > >Alex Nielsen ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
