Jeffrey, If you really are wanting to move the volume from one rmm to another, rather than simply be able to read the data from production, we document a split/merge process for the CDS in the DFSMSrmm Primer redbook.
As an alternative, I know of some installations that use a Rexx procedure to list the volume to be moved, and use the results to create ADDVOLUME and ADDDATASET commands which are used to define the volume in the target system. Be careful not to keep multiple RMM plexes with the same volume defined as this could result in problems with volume status and retention. Mike Wood RMM Development On Thu, 10 Jan 2008 12:04:44 -0600, Jeffrey Deaver <[EMAIL PROTECTED]> wrote: >Hello all - > >We have two LPARS which can both see a virtual tape device. We have a >need to be able to create virtual tapes on the Test LPAR and then 'migrate' >them to the Production LPAR. In other words, I need to be able to export >the RMM information that was created on Test and import it into RMM on >Production. The virtual tape itself will not move. This is not a VTS that >exports logical tapes to stacked physical tapes... there are only the >logical (virtual) tapes. > >Has anyone done anything like this? > >Jeffrey Deaver, Engineer >Systems Engineering >[EMAIL PROTECTED] >651-665-4231(v) >651-610-7670(p) ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
