Hi all... we converted over the weekend from z/OS 1.4 and CA TCPIP to z/OS 1.7 with both IBM and CA stacks. The IBM stack is running all sockets, etc. The CA stack only does telnet and ftp. My problem...
We use the old EPS product to send prints from the mainframe to network printers and it is using the IBM stack now. In times of busy printing (like today) messages come from EPS say "no local ports available". With netstat commands I can see lots of "TimeWait"'s. The sessions will clear soon and another batch of prints will be sent until no local ports again. This is causing prints to be delivered slowly and we are starting to get complaints. We are pretty green with IBM's TCPIP. I am franticly looking into the problem, but I sure would appreciate any pointers where to look, what to do. It would be really bad here if we had to back off just because of this. Thanks for any help... Robert Johnston Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
