Must be my cold but it should have occurred to me SAS might write a SMF record. We have MXG so I should be ok from here.
Much appreciated! -----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Horne, Jim - James S Sent: Friday, January 25, 2008 10:26 AM To: [email protected] Subject: Re: identify sas uage by component NOTICE: All information in and attached to the e-mail(s) below may be proprietary, confidential, privileged and otherwise protected from improper or erroneous disclosure. If you are not the sender's intended recipient, you are not authorized to intercept, read, print, retain, copy, forward, or disseminate this message. If you have erroneously received this communication, please notify the sender immediately by phone (704-758-1000) or by e-mail and destroy all copies of this message (electronic, paper, or otherwise). Thank you. Yes, SAS can be made to cut a user defined SMF record with that information in it. The installation guide will start you down the path and SAS tech support is also helpful. It's been over two years since I set it up here but I can try to help you off-list once you start and have specific questions (also SAS Tech Support is the best way to go). If you have MXG, the SAS SMF layout is defined in it - TYPESASU. If you don't have MXG, you should get it since you already have SAS. Jim Horne Lowe's Companies, Inc. -----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Tim Campbell Sent: Friday, January 25, 2008 12:50 PM To: [email protected] Subject: identify sas uage by component Without buying any special software is there away to identify SAS usage by component? Not just who uses SAS bt who uses SAS/FSP , SAS/GRAPH etc ... ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
