Hi list, I have a situation I don't fully understand...
I have a shared Escon channel used as CTC between 2 Lpars. The CTC is used for XCF and VTAM communication. For XCF there are 2 Devices defined on each system (in and out) and for VTAM there is 1 device defined on each system. Looking on RMF report I see the following info: Channel utilization is low - about 10% Device Disconnect time for the IN device (on both systems) is huge - about 5000ms (the out devices numbers are fine). The in device utilization is almost at all time near 100%. I don't think that this is a normal situtation, but except from GRS delay for XCF (about 5%) It doesn't seemes to have any performance effect or am I wrong? Any help would be appricated. Thanks Magen ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
