Can someone see why this won't work. I have added the OSA info and when I
activate configuration, I cannot get to the mainframe through either device. I
can't seem to see what I have done wrong......The TNCP device is existing
and works until I add the OSA 'stuff' in.....Although, I do use a gateway NOT
beginroutes with the original IP stack with just the TNCP STUFF...
Original gateway statement:
GATEWAY
192.168.4 = TNCPA01 4096 0
DEFAULTNET 192.168.4.1 TNCPA01 4096 0)
*******NEWIP STACK INFO*****
DEVICE TNCPA01R CLAW A00 MVS WTNCPA01 NONE
LINK TNCPA01 IP 0 TNCPA01R
DEVICE OSA2100 MPCIPA PRIROUTER
LINK OSA21LNK IPAQENET OSA2100
HOME
192.168.4.2 TNCPA01
192.168.18.3 OSA21LNK
BEGINROUTES
Route 192.168.4.0/24 = TNCPA01 MTU 4096
Route 192.168.18.0/24 = OSA21LNK MTU 1500
ROUTE DEFAULT 192.168.18.3 OSA21LNK MTU 1500
ENDROUTES
START TNCPA01R
START OSA2100
******VTAM TRL**************
OSA2100 VBUILD TYPE=TRL
OSA2100P TRLE LNCTL=MPC,
READ=2100,
WRITE=2101,
DATAPATH=(2102),
MPCLEVEL=QDIO,
PORTNAME=OSA2100
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
