Um, I think the only 'approved' DoD type cleaning is ICKSHREADER. That is, complete physical destruction. In the case of modern DASD, I think you are expected to physically remove all of the hard drives and return only the box.
-----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Lizette Koehler Sent: Tuesday, July 15, 2008 2:26 PM To: [email protected] Subject: Clearing out DASD I have a need to do a DOD type clearing of some dasd before it is returned to the vendor. I found the CBT Tape entry (737) but was wondering if there is another one out there that will write Binary 0's and 1's for the number of times I specify? I do not have DITTO. Thanks. Lizette NOTICE: This electronic mail message and any files transmitted with it are intended exclusively for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged information. Any unauthorized review, use, printing, saving, copying, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
