May want to try this to ensure the FMID will APPLY CHECK with no "HOLD" errors.
At least this is what I've found to work well:
SET BOUNDARY (-targetzone-).
APPLY
GROUPEXTEND
BYPASS(HOLDSYSTEM,HOLDCLASS(HIPER))
S(
HXML190
)
FORFMID(
HXML190
)
SOURCEID(PRP,HIPER)
CHECK
RETRY(YES).
Worry about UA40708 after you've completed the above APPLY without the CHECK.
HTH
Dick Bond
HFHS Mainframe Administration
> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf
> Of Mark Zelden
> Sent: Friday, September 05, 2008 5:47 PM
> To: [email protected]
> Subject: Re: Need some SMP help.
>
> On Fri, 5 Sep 2008 16:20:14 -0400, Howard Rifkind <[EMAIL PROTECTED]>
> wrote:
>
> >Not an expert with SMP and I'm trying to do an Apply/Check against the
> sysmod below and getting the following out of SMP.
>
> The XML Toolkit has been received but I can't do an Apply/Check against some
> of the sysmods.
>
> I looked at the PTF in the PTS and sure enough it doesn't have what the SMP
> report says it doesn't have.
>
> Any insight/help in resolving this and where I've gone off the track is
> appreciated.
>
> Thanks.
>
> GIM37903E ** APPLY PROCESSING FAILED FOR SYSMOD UA40708 BECAUSE IT HAS NO
> APPLICABLE ++VER MCS.
>
> APPLY FORFMID(HXML190)
> BYPASS (HOLDSYSTEM(DOC ENH))
> SELECT( /* Install selected SYSMOD. */
> UA40708 /* Specify SYSMOD name here.*/
> ) /* */
> JCLINREPORT
> CHECK /* In check mode only. */.
>
>
> =============================
>
>
==============================================================================
CONFIDENTIALITY NOTICE: This email contains information from the sender that
may be CONFIDENTIAL, LEGALLY PRIVILEGED, PROPRIETARY or otherwise protected
from disclosure. This email is intended for use only by the person or entity to
whom it is addressed. If you are not the intended recipient, any use,
disclosure, copying, distribution, printing, or any action taken in reliance on
the contents of this email, is strictly prohibited. If you received this email
in error, please contact the sending party by reply email, delete the email
from your computer system and shred any paper copies.
Note to Patients: There are a number of risks you should consider before using
e-mail to communicate with us. See our Privacy Policy and Henry Ford My Health
at www.henryford.com for more detailed information. If you do not believe that
our policy gives you the privacy and security protection you need, do not send
e-mail or Internet communications to us.
==============================================================================
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
