1. what is the RAID config ? 2. what is the microcode level 3. there is an e-pack needed to support z10 - was that applied ?
we're also moving to z10 ... applying the e-pack this weekend to the boxes on test systems. - ravi On Fri, 10 Oct 2008 01:42:48 -0500, Jorge Garcia <[EMAIL PROTECTED]> wrote: >Hello: > > We are working in a test project in Montpellier and we have problems with our >DMX-4 DASD (or with z10). >We are sending 20gb by FTP and at the begining the execution is right. But >two minutes later the disconnect time up to 13 milliseconds and when it >reachs 30 milliseconds we cancel it. > >This situacion ocurrs with ficon director and with connect direct channel >between DMX-4 and z10. > >Does anybody know about a fix or apar to solve this problem o similar?. >We have revised the hardware configuration and It's ok. > >Regards > >Jorge García Juanino >Técnico de Sistemas Z/Os/Área de Producción y Tecnología >MAPFRE TECNOLOGÍAS DE LA INFORMACIÓN >Crtra. De Pozuelo nº 52 >28220 Majadahonda (Madrid) >Tfno: 91 581 27 34/ 618 33 35 59 >Fax: 91 581 24 01 >[EMAIL PROTECTED] ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
