Doing the ALTER from SCRATCH to SCRATCH seemed to have fixed the problem. I would not have thought to do that. Thanks.
Also, I usually go to ISMF 2.3 and list tapes that way. Then sort on 4 (Volume ERROR Status) Lizette > >I am running z/OS V1.9 at RSU 0808 with CA1 V11.5 SP2. > >Lizette >> >>Lizette: >> >> I have removed the IBM version of the CBRUXENT, brought down OAM, did a LLA >> refresh, and the display is still incorrect. What version of CA-1 software >> are you running, and what version of Z/OS are you running? >> >>This shop is running CA-1 Version 11.5 SP4, and Z/OS 1.9. >> >> >>I will check that out. >> >>I know that the one shipped by IBM is in SYS1.LINKLIB at the top of the >>linklst and the one for CA1 is in the SYS1.CA1.LINKLIB data set which is >>further down. >> >>Lizette >> >> >>> >>>Lizette Koehler wrote: >>>> List - >>>> >>>> I have been wrestling with this for a couple of weeks. Thought I had it >>>> fixed but it still shows errors. >>>> >>>> When I display my VTS >>>> >>>> RESPONSE=SDH8 >>>> CBR1110I OAM library status: 410 >>>> TAPE LIB DEVICE TOT ONL AVL TOTAL EMPTY SCRTCH ON OP >>>> LIBRARY TYP TYPE DRV DRV DRV SLOTS SLOTS VOLS >>>> SCSVTS1 VL 3584-L22 128 128 127 959 413 5514 Y Y >>>> ---------------------------------------------------------------------- >>>> MEDIA SCRATCH SCRATCH SCRATCH >>>> TYPE COUNT THRESHOLD CATEGORY >>>> MEDIA2 5514 1000 1002 >>>> ---------------------------------------------------------------------- >>>> LIBRARY ID: B2764 >>>> OPERATIONAL STATE: AUTOMATED >>>> ERROR CATEGORY SCRATCH COUNT: 14 >>>> SCRATCH STACKED VOLUME COUNT: 90 >>>> PRIVATE STACKED VOLUME COUNT: 84 >>>> ---------------------------------------------------------------------- >>>> Bulk input/output not configured. >>>> >>>> It shows 14 tapes in the error category Scratch Count. >>>> >>>> I went into ISMF and listed all the volumes and find this type of entry >>>> >>>> 514454 SCRATCH REJ BY TAP MGT SYS >>>> 517590 SCRATCH REJ BY TAP MGT SYS >>>> >>>> I looked in CA1 and cannot figure out how to get these errors removed. >>>> >>>> Thoughs? >>>> >>>> Lizette >>>> >>>> ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html