Jerry,

You need to ACTIVATE both your IOCDS and IODF using the same ACTIVATE command.

Use:  ACTIVATE ACTIOCDS=A2,IODF=XX,FORCE=(DEVICE,CANDIDATE) -or whatever suits 
your needs. You must have the IOCDS and IODF with the same token value. 

Use:  D IOS,CONFIG - to display the currently active IOCDS and IODF. 

Before you can change the IOCDS, both the IOCDS and IODF must have the same 
token value. If the IOCDS and IODF token values not equal, you can only do 
software configuration ACTIVATEs. (ACTIVATE IODF=XX)

HTH

HITACHI
 DATA SYSTEMS 
Raymond E. Noal 
Senior Technical Engineer 
Office: (408) 970 - 7978 

-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of 
Jerry Fuchs
Sent: Wednesday, December 03, 2008 8:59 AM
To: [email protected]
Subject: Activation of IOCDS fails

This is the first time that I have had to update the IODF and IOCDS under 
z/OS 1.7.

After activating the IODF I activate the IOCDS and it failes with the 
following messages

ACTIVATE ACTIOCDS=A2 
IEF196I IEF237I 6001 ALLOCATED TO SYS00006 
IEF196I IEF237I 6001 ALLOCATED TO SYS00007 
IEF196I IEF285I   IODF.IODF02                                  KEPT 
IEF196I IEF285I   VOL SER NOS= ESCATA. 
IEF196I IEF285I   IODF.IODF02                                  KEPT 
IEF196I IEF285I   VOL SER NOS= ESCATA. 
IOS500I ACTIVATE RESULTS 692 
ACTIVATE FAILED - ERROR MESSAGE(S) ISSUED 
NOTE = A821,PROCESSOR DEFINITION WENDYS IN CURRENTLY ACTIVE IODF 
            IODF.IODF02 DOES NOT MATCH CURRENT HARDWARE DEFINITION, 
            H/W AND S/W ARE OUT OF SYNC. 
 COMPID=SC1XL 
REASON=A828,KEYWORD ACTIOCDS NOT ALLOWED, ONLY SOFTWARE CHANGES ARE 
            POSSIBLE. 
 COMPID=SC1XL 
REASON=A819,ONLY SOFTWARE CHANGES ARE ALLOWED, SPECIFY SOFT FOR 
            CONFIRMATION. 
 COMPID=SC1XL 

I am at a complete loss. I use a batch job to build the IODF and IOCDS.

I can send the listing from my job offline if you want to take a look at 
it.

Thanks

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Reply via email to